TiAlN Coating R210090414EPM,0.177 Thick Sandvik Coromant COROMILL Carbide Milling Insert 0.055 Corner Radius GC1010 Grade Square R210 Style Pack of 10

TiAlN Coating R210090414EPM,0.177 Thick Sandvik Coromant COROMILL Carbide Milling Insert 0.055 Corner Radius GC1010 Grade Square R210 Style Pack of 10

Sandvik Coromant COROMILL Carbide Milling Insert, R210 Style, Square, GC1010 Grade, TiAlN Coating, R210090414EPM, 0.177' Thick, 0.055' Corner Radius (Pack of 10): Industrial & Scientific. Sandvik Coromant COROMILL Carbide Milling Insert, R210 Style, Square, GC1010 Grade, TiAlN Coating, R210090414EPM, 0.177" Thick, 0.055" Corner Radius (Pack of 10): Industrial & Scientific. Used with the Sandvik Coromant CoroMill 210 for medium-machining high-feed face and plunge milling on hardened steel in average-to-good machining conditions 。 GC1010 grade is a physical vapor deposition (PVD) coating of titanium aluminum nitride (TiAlN) over carbide that provides good wear resistance without limiting shock resistance and performs well at high temperatures 。 Medium-machining (PM) chipbreaker style helps prevent chip buildup at low cutting depths and high feeds 。 Square shape has strong cutting edges 。 Screw-style mounting for secure clamping 。 Maximum cut depth: 0.047 inches 。 The R20 GC00 right-hand carbide indexable milling insert has a square shape and a PM chipbreaker, and provides good wear resistance without limiting shock resistance for medium machining of hardened steel in average-to-good machining conditions. A combination of carbide and a thin coating of titanium aluminum nitride (TiAlN) applied through physical vapor deposition (PVD) performs well at high cutting temperatures and offers resistance to thermal cracking and plastic deformation. In general, coatings extend insert life and provide better wear resistance than uncoated inserts. PVD coatings maintain a sharper cutting edge than those with chemical vapor deposition (CVD) coatings. 。 This positive insert is used with the CoroMill 20, a screw-style insert holding system for high-feed face and plunge milling. The insert has a PM chipbreaker for medium machining. The square shape provides strong cutting edges. The insert is available with a choice of two edge performance types: M for highest security, or E for highest sharpness and precision. The insert has a hole in the center, four cutting edges, and a 7-degree clearance angle. 。 Milling inserts are coded according to their specific cutting and application capability (e.g., R20-09 04 2M-PM). Each section of the code represents details of the insert: hand, compatible toolholder series, size, corner radius, edge performance, and chipbreaker style. Insert shapes and sizes may have different inscribed circle (iC) measurements, which relate to ranges of cutting depths, speeds, lead angle, and feed rates. The iC is the largest circle that can be drawn within the edges of the insert shape. Generally, as the insert size and the iC become larger, the maximum cutting depth increases. Cutting depth influences the metal removal rate, the number of cuts, chip evacuation efficiency, and power required when using the insert. Indexable inserts are small cutting tools designed to remove material in external and internal cutting applications such as turning, milling, drilling, and grooving. They are held by an insert holder, have multiple cutting edges, and can be rotated when one edge wears down. Multiple inserts can accomplish a variety of cuts in one operation. An insert is either positive or negative, which refers to the rake or clearance angle at which the insert removes material.。 produces tools for turning, milling, and drilling. Headquartered in Sweden and represented in 30 countries, the company manufactures tools used throughout the metalworking field, including the automotive and aerospace, die and mold, and general engineering industries.。 Matching Inserts to Holders These inserts are used with the CoroMill 20, a screw-style insert holding system. This system is for use in high-feed face and plunge milling. It is used in roughing applications and offers high productivity. When used with the CoroMill 20, the insert has an 80-degree lead angle and 0-degree entering angle that produces thin chips for high feeds. The cutting force stabilizes the tool, limiting vibration in long and unstable setups.。 。 。 。